Flanged Wyes

AMERICAN Ductile Iron Flanged Fittings
AMERICAN Standard
Flanged Wyes - 45° Lateral

Flanged Wyes 45° Lateral | Flanged True Wyes | To Top of Page

ADIP Table No. 6-13

Size in.		Pressure Rating psi	Dimension in Inches					Weight lb
Run	Branch	Pressure Rating psi	T	T1	M	N	P	Weight lb
4	4	250	0.52	0.52	12	3	12	80
6	4	250	0.55	0.52	14.5	3.5	14.5	115
6	6	250	0.55	0.55	14.5	3.5	14.5	125
8	4	250	0.6	0.52	17.5	4.5	17.5	180
8	6	250	0.6	0.55	17.5	4.5	17.5	190
8	8	250	0.6	0.6	17.5	4.5	17.5	215
10	4	250	0.68	0.52	20.5	5	20.5	260
10	6	250	0.68	0.55	20.5	5	20.5	270
10	8	250	0.68	0.6	20.5	5	20.5	295
10	10	250	0.68	0.68	20.5	5	20.5	325
12	4	250	0.75	0.52	24.5	5.5	24.5	380
12	6	250	0.75	0.55	24.5	5.5	24.5	395
12	8	250	0.75	0.6	24.5	5.5	24.5	420
12	10	250	0.75	0.68	24.5	5.5	24.5	455
12	12	250	0.75	0.75	24.5	5.5	24.5	495
14	4	250	0.82	0.52	27	6	27	505
14	6	250	0.82	0.55	27	6	27	520
14	8	250	0.82	0.6	27	6	27	545
14	10	250	0.82	0.68	27	6	27	580
14	12	250	0.82	0.75	27	6	27	620
14	14	250	0.82	0.82	27	6	27	665
16	4	250	0.82	0.52	27	6	27	665
16	6	250	0.89	0.55	30	6.5	30	680
16	8	250	0.89	0.6	30	6.5	30	710
16	10	250	0.89	0.68	30	6.5	30	740
16	12	250	0.89	0.75	30	6.5	30	785
16	14	250	0.89	0.82	30	6.5	30	830
16	16	250	0.89	0.89	30	6.5	30	885
18	4	250	0.96	0.52	25	1	27.5	275
18	6	250	0.96	0.55	25	1	27.5	450
18	8	250	0.96	0.6	25	1	27.5	625
18	10	250	0.96	0.68	32	7	32	885
18	12	250	0.96	0.75	32	7	32	930
18	14	250	0.96	0.82	32	7	32	975
18	16	250	0.96	0.89	32	7	32	1025
18	18	250	0.96	0.96	32	7	32	1075
20	4	250	1.03	0.52	27	1	29.5	710
20	6	250	1.03	0.55	24	1	29.5	720
20	8	250	1.03	0.6	29	1	29.5	740
20	10	250	1.03	0.68	27	1	29.5	805
20	12	250	1.03	0.75	35	8	35	1170
20	14	250	1.03	0.82	35	8	35	1215
20	16	250	1.03	0.89	35	8	35	1270
20	18	250	1.03	0.96	35	8	35	1315
20	20	250	1.03	1.03	35	8	35	1390
24	4	250	1.16	0.52	31.5	0.5	34.5	790
24	6	250	1.16	0.55	31.5	0.5	34.5	1060
24	8	250	1.16	0.6	31.5	0.5	34.5	1080
24	10	250	1.16	0.68	31.5	0.5	34.5	1105
24	12	250	1.16	0.75	31.5	0.5	34.5	1200
24	14	250	1.16	0.82	40.5	9	40.5	1750
24	16	250	1.16	0.89	40.5	9	40.5	1805
24	18	250	1.16	0.96	40.5	9	40.5	1855
24	20	250	1.16	1.03	40.5	9	40.5	1930
24	24	250	1.16	1.16	40.5	9	40.5	2095
30	12	250	1.37	0.75	49	10	49	2795
30	14	250	1.37	0.82	49	10	49	2850
30	16	250	1.37	0.89	49	10	49	2905
30	18	250	1.37	0.96	49	10	49	2960
30	20	250	1.37	1.03	49	10	49	3040
30	24	250	1.37	1.16	49	10	49	3205
30	30	250	1.37	1.37	52.5	18.3	52.5	4125
36	16	250	1.58	0.89	54	15.3	54	4455
36	18	250	1.58	0.96	54	15.3	54	4505
36	20	250	1.58	1.03	54	15.3	54	4575
36	24	250	1.58	1.16	54	15.3	54	4725
36	30	250	1.58	1.37	56	15.3	56	5200
36	36	250	1.58	1.58	60	19.5	60	6310
42	20	250	1.78	1.03	60	12	60	6110
42	24	250	1.78	1.16	60	12	60	6255
42	30	250	1.78	1.37	63	12	63	6855
42	36	150	1.78	1.58	66	12	66	7650
42	42	150	1.78	1.78	71	15	71	9170
48	18	250	1.96	0.96	65	9	65	7620
48	20	250	1.96	1.03	65	9	65	7685
48	24	250	1.96	1.16	58	5	64	6840
48	30	250	1.96	1.37	63	9	68	8015
48	36	250	1.96	1.58	69	7	72	8970
48	42	150	1.96	1.78	77	12	77	11010
48	48	150	1.96	1.96	77	16	77	12100

Notes:
Numerals on cuts indicate standard order of specifying size of fitting.
Wyes are special. Substituting a pipe with a lateral welded-on outlet may be more economical and offer quicker shipment. See Specials (Section 7) or contact AMERICAN. A tee with a 45° bend may also offer quicker shipment.
The center-to-face designations "M", "N" and "P" are used for straight size wyes as well as reducing wyes; however, in Table No. 6-2 the letters "D" and "E" are used for specifying center-to-face dimensions for straight size wyes.
See General Notes.
Note that numbering sequence for wye ends differs from that shown in ANSI B16.1.

AMERICAN Ductile Iron Flanged Fittings
AMERICAN Standard
True Wye

Flanged Wyes 45° Lateral | Flanged True Wyes | To Top of Page

ADIP Table No. 6-14

Size in.		Pressure Rating psi	Dimension in Inches				Weight lb
Run (1)	Branch (2) & (3)	Pressure Rating psi	T	T1	A	E	Weight lb
4	4	250	0.52	0.52	6.5	3	55
6	6	250	0.55	0.55	8	3.5	85
8	8	250	0.6	0.6	9	4.5	140
10	10	250	0.68	0.68	11	5	205
12	12	250	0.75	0.75	12	5.5	300
14	14	250	0.82	0.82	14	6	435
16	16	250	0.89	0.89	15	6.5	580
18	18	250	0.96	0.96	16.5	7	680
20	20	250	1.03	1.03	18	8	960
24	24	250	1.16	1.16	22	9	1370
30	18	250	1.37	0.96	25	10	1185
30	20	250	1.37	1.03	25	10	1210
30	24	250	1.37	1.16	25	10	1585
30	30	250	1.37	1.37	25	10	2175
36	24	250	1.58	1.16	28	12	2080
36	30	250	1.58	1.37	28	15	2655
36	36	250	1.58	1.58	28	15	3470
42	30	250	1.78	1.37	31	11.75	3410
42	36	*150	1.78	1.58	31	19	4205
42	42	*150	1.78	1.78	31	21	5235
48	36	250	1.96	1.58	28	14	4415
48	48	*150	1.96	1.96	34	18	6565
54	36	250	1.55	1.58	28	16	3725

Notes:
*Contact AMERICAN if higher pressure ratings are required.
Numerals on cuts indicate standard order of specifying size of fitting.
Some larger sizes and special combinations are available. See General Notes.
Reducing true wyes are not available in 24" and smaller sizes.

To Top of Page

> Flanged Wyes 45° Lateral
> Flanged True Wyes